-
Works with plastic reels and has an automatic unwinding
system.
-
Continuous
and automatic cycle.
- Reinforced
double chain system that transports the plastic through
the machine.
- Optimized
heat distribution is provided by an individual
temperature control system for each zone of the furnace.
The machine has 8 temperature zones.
- Oven
is designed to allow thermal expansion, manufactured
in stainless steel to prevent oxidation when using
PVC.
- Instantaneous
vacuum is obtained through a high outflow pump attached
to a vacuum tank.
- Detaching
device is adjusted by air pressure and time.
It is useful when the molding adheres to the tool
(mainly when using male tools).
- Tool
temperature control system and preheating electrical
resistances.
- Manual
movements to adjust the machine.
- Counter-mold
for plug
assistance.
-
C-series
TC has die rules that work against a stainless steel
block located over the aluminum tool to cut the
plastic. This operation is developed in the same
station where the plastic is molded to reduce variations
in cutting. The molded parts go with the plastic
skeleton (web) to the stacking device.
-
Fast
pneumatic movements are achieved through the use
of international manufacturer's components. The
press of C-series TC has mechanical toggles that
provide a cutting force of 25 KN.
-
C-series
TC is provided with a stacking device that may be
upgraded to an A/B stacking device to prevent the
entanglement of two consecutive parts.
-
Manual
adjustment of plastic width through a self-centering
screw device. It is possible to use different transversal
distances in the machine to stretch the plastic.
-
Equipped
with winding device for material recycling.
-
High-capacity
PLC
with easy-to-use interface. It controls the temperature
zones of the furnace, the heating and cooling times,
the step distance and two product counters, besides
other functions. It has a memory for 30 tools including
all temperatures, times and configuration of each
one.
