Among
its features the following should be highlighted:
The machine
works with plastic plates or reels. It has a support
for the plastic reel.
Automatic
cycle, excluding plastic placing and removal.
Molds thick
materials (up toĽ") due to its control system of
heating temperature and time.
Optimized
heat distribution is obtained through individual
temperature control of each zone of the oven. The
number of zones varies according to the machine
size.
Oven is designed
to allow thermal expansion and is manufactured in
stainless steel to prevent oxidation in case of
using PVC.
Instantaneous
vacuum is obtained through the use of a high outflow
pump attached to a vacuum tank.
Detaching
device is adjusted
by air pressure and time. This is useful when the
molding adheres to the tool (mainly when using male
tools).
Fast pneumatic
movements due to the use of first-class components.
Infrared
sensor to measure sheet temperature during
the heating time.
Adjustable
height of the molding table according to mold size,
making possible to mold pre-printed materials.
Manual operation
mode to ease adjustment in set-up operations.
Counter-mold
for plug
assistance.
Pre-blowing
(billow).
Radial fans
to reduce cooling time.
High-capacity
PLC
with friendly interface. It controls the temperature
zones of the furnace, the heating and cooling times
and the temperature of the plastic during the heating
period, besides other functions. It has a memory
for 20 tools including all temperatures, times and
configuration of each one.
Besides the molding area it is possible to select
optional features to equip SUPRAVAC:
Catalytic
gas oven to replace the conventional oven.
The catalytic design ensures safe operation and
controlled heating temperature.
Fans
equipped with water spreading system reduce
cooling time and increase productivity.
|
