| |
|
SUPRAVAC-2
- General Thermoforming Machine |
 |
 |
Automatic
Cycle - except the placement and replacement of
the material.
Two potent
ovens ( superior and inferior ) that assure fast
heating of the plate and consequently high productivity.
Ovens composed by low thermal inertia components
and fast response. The ovens operate in low temperature
when backward, economizing energy and avoiding superheating
of the structure. The ovens are adequate to the
thermal dilatation and made of stainless steel (avoid
corrosion by using PVC).
Possibility
of shaping of dense materials through the time and
heating temperature regulation.
Optimal
heat distribution
obtained by the temperature individual PI control
for each resistance zone of the oven. The number
of zones varies according to the size of the machine.
Possibility
of use of quartz or halogen resistances as heating
components.
Deformation
control of the plate during the heating:
The Machine has optical sensors that assure, through
vacuum and compressed air, that the plate does not
be in contact with none of the ovens. This control
allows the ovens to be nearer the plate (faster
heating) and allows the shipping of large dense
plates and of materials that deform excessively
when heated, such as PE and PP.
Instantaneous
vacuum for having a high sewage pump connected to
a tank. The machine has two vacuum valves with different
sewages in order to facilitate the mould’s
regulation.
Detaching
device with
pressure and time regulation in order to the shaped
parts easily release from the mould (mainly in the
use of mould that fits into another).
High speed
pneumatic movements generated by high quality components
(FESTO , PARKER).
High quality
electric equipment (GE ,Schneider, Omron).
Movement
stock absorber with deadening cylinders and special
polyurethane, assuring great durability and noise
reduction.
Robust
table with adjustable vertical position in order
to adequate it to the height of the mould.
Equipped with
countermould
(plug).
If necessary,
it can be equipped with removable components in
the mould and in the countermould.
Billow
or pre-blow.
High
sewage axial coolers to refrigerate
the shaped plastic.
Infrared
sensor –
responsible by the monitoring of plastic plates
temperature in the heating, assuring a perfect control
of the temperatures and repetitiveness of the process
in different operation conditions, such as ambient
temperature and machine operational time.
Light curtain
to provide the operator with total security.
PLC
with simple and high capacity command interface.
Controls the temperatures , times, has mould memory,
is adjustable for configurations of several types
of shaping ; has part counter. Allows operation
accessibility in manual mode for mould adjusting.
Display to
supervise the shaping process.
Eletro-Forming
provides operation and maintenance manual, pneumatic
and electric plants and list of components to facilitate
the maintenance.
1
year guarantee for all parts and components.
List of optional
items.
|
|
 |
 |
|
 |
|
|
